Tools and equipment
Audio for slide 1 (mp3 |6|KB)
Do you know why 'a good tradesman never blames his tools'?
It's because he always uses the right tool for the job, and only ever uses tools that are in good condition.
If a particular tool is malfunctioning or getting worn or going blunt - don't keep using it!
If you can't fix the problem on the spot, put it to one side and either fix it later or replace it.
It's because he always uses the right tool for the job, and only ever uses tools that are in good condition.
If a particular tool is malfunctioning or getting worn or going blunt - don't keep using it!
If you can't fix the problem on the spot, put it to one side and either fix it later or replace it.
Audio for slide 2 (mp3 |6|KB)
Remember that for every tool to perform properly and not let you down when it's needed, it has to be treated properly and kept in good working order.
Set out below are the main hand tools used to install lay flat flooring.
Set out below are the main hand tools used to install lay flat flooring.
Common hand tools
 utility Knife |
 straight edge |
 square |
 chalk line |
 tape measure |
 hacksaw |
 notched trowel |
 hammer |
 scribing bar |
 dividers |
 floor roller |
 hand roller |
 recess scriber |
 hot air gun |
 edge trimmer |
 wall trimmer |
 dolly |
 stair tool |
Learning activity
Audio 3 (mp3 |6|KB)Choose three cutting tools from the table above.
How you would ensure that you always have a sharp blade to work with for each of these tools?
What types of spare blades would you need to carry with you?
Go to Assignment
Industry Network Training and Assessment Resourses
© 2023 Workspace Training